Cabinets
The Electronics Power Cabinet is a heavy duty steel enclosure which can be supplied to the required NEMA standards. It contains the necessary controls and signal processing circuits to operate the gauge system and to have it communicate externally. The EPC houses the computer running Windows® in the X-Acta and Accura Gauges or a PLC and a PC in the Perfecta Gauge. All software is loaded onto the Gauge at Global Gauge and thoroughly tested before shipping.

Operator Consolle
The optional Operator's Remote is to remotely operate the gauge and to view real-time data. The Operator's Remote may be equipped with a Keyboard, Function Key Panel or Touch Screen at the user's option. Want another remote? Simply add a PC with Windows NT, 2000 Prof., XP Prof. ® and gauge software, network card, plus cable, and you have it!

Sensors
Available models of generators: 30KV - 75 KV - 150 KV - 250 KV. The X-Ray Generator is a modern, reliable device, using a state-of-the-art, solid-state high-voltage multiplier circuit and a proven, reliable X-ray tube. The generator can be set at any kV level over its operating range, and the voltage can be maintained at better than +/- 99.9% of the set point. Since the generator is set at a specific kV point for each nominal thickness, the noise component associated with the generator is minimized at every thickness. Additionally, since the generator is adjusted to the precise level of X-ray required to measure the target thickness, no extra radiation is emitted, making this generator design inherently safer.


PMT Detectors and Ion Chambers are available. The Detector is an integrated X-ray detection system which includes all necessary elements for measuring the X-ray signal and for providing an output to the gauge computer. The Detector is a sealed aluminum housing, and contains a scintillator crystal, photo-multiplier tube (PMT), PMT high-voltage regulated power supply, pre-amplifier, and amplifier circuit. The electronic circuits are designed and manufactured with very close coupling, to reduce the signal noise.

Frames
C a O Frames, solid steel or aluminum.
Different sizes depending from apllication.

The heart of the measuring system is entirely designed, manufactured and engineered by us in our workshops.